Images are digital mockups unless labeled “Actual Product Photo.”
Lucky Teacher Life St. Patrick's Day T-Shirt | Shamrock Teacher Tee
Free shipping on orders $200+
Teaching is a gift, and the teacher life chose you, luckily. The Lucky Teacher Life St. Patrick's Day T-Shirt from Embedded Designz covers nine patterned shamrocks in green and gold, each labeled with a teacher word, above #teacherlife.
Sublimated on a white tee that is soft, stretchy and not see-through, it is made for the classroom on March 17 and the teachers' lounge. Not a plain green tee: it says what teaching actually takes.
You choose: Size, S–4XL. The tee is white, and the artwork is pre-set, so there is no text to add. Printed to order in DFW, Texas.
- Fit: Relaxed, true to size
- Sizes: S–4XL
- Fabric: 6.8 oz, 95% polyester, 5% spandex
- Decoration: Sublimation print, center chest
See the full Care Instructions page, with photos
Embroidery & Apparel Care
Hand Washing Recommended: Cool water with mild or gentle laundry detergent.
Machine Wash:
- Turn item inside out
- Wash on delicate
- Wash with no other items
- Use cool water and mild laundry detergent
- Avoid harsh chemicals
- Do not bleach or use oxygen bleach
- Do not use fabric softener
- Do not dry clean
Air Drying Recommended: Lay flat on a drying rack, or hang to drip dry.
Machine Dry (if you prefer):
- Use low heat or the delicate setting
- Turn item inside out
- Dry with no other items
Ironing Recommendations:
- Turn item inside out
- Do not apply iron directly to the design
Drinkware Care
Stainless Steel:
- Handle with care — do not drop
- Hand wash only, do not soak
- Not dishwasher safe
- Not microwave safe
- Avoid extreme heat
- Safe for hot and cold beverages
- To prevent lid damage, occasionally slide the lid open to release pressure when drinking hot liquids
Ceramic and Glass:
- Handle with care — do not drop
- Hand wash only, do not soak
- Not dishwasher safe
- Not microwave safe
- Avoid extreme heat
- Avoid sudden, extreme temperature changes
- Safe for hot and cold beverages
Housewares Care
Glass:
- Hand wash only
- Not dishwasher safe
- Do not soak
- Not microwave safe
- Avoid extreme heat
- Avoid sudden, extreme temperature changes
Ceramic:
- Hand wash only
- Not dishwasher safe
- Do not soak
- Not microwave safe
- Avoid extreme heat
- Avoid sudden, extreme temperature changes
Wood (cutting boards, serving boards):
- Hand wash only with warm water and mild dish soap
- Use a soft cloth or sponge to clean
- Do not soak
- Not microwave or dishwasher safe
- Immediately pat dry with a clean towel
- Stand the board upright to air dry completely
- Store in a cool, dry place, standing upright or lying flat with airflow
- Keep away from direct sunlight or heat sources to prevent warping
- Do not use the board as a trivet for hot pots and pans
- Avoid cutting extremely hard items, like frozen food, to prevent gouges
- Polish periodically with food-grade mineral oil
Laser Engraving Care
- Clean with mild soap, water, and a soft, non-abrasive cloth that suits the base material
- Do not use abrasive pads, harsh chemicals, solvents, or aggressive scrubbing over engraved or color-filled areas
- Do not soak, unless the product is designed for water exposure
- Avoid prolonged extreme heat and direct sunlight, which can affect coatings, color fills, adhesives, or the base material
- For engraved drinkware, cutting boards, glassware, and other specialty items, also follow the care instructions for that product's material
Important: Color-filled engraving may gradually fade or wear with normal use and repeated cleaning. This is a natural characteristic of the finish and is not a product defect.
UV Printing Care
- Clean gently with mild soap, water, and a soft, non-abrasive cloth
- Do not scrub printed areas with abrasive pads, brushes, harsh cleaners, solvents, or alcohol-based products, unless specifically approved for the item
- Do not soak, unless the product is designed for water exposure
- Do not leave UV-printed products in a hot vehicle, in direct sunlight for long periods, or near heaters
- Excessive heat can damage, soften, warp, discolor, or shorten the life of the printed finish or base material
3D Printing Care
- Clean with a soft damp cloth, or mild soap and cool to lukewarm water when appropriate
- Do not use abrasive cleaners, harsh chemicals, solvents, or very hot water
- Unless stated otherwise, 3D-printed items are not dishwasher, microwave, or oven safe
- Do not leave 3D-printed products in a hot vehicle, in direct sunlight for long periods, or near open flames, heaters, or other high-temperature areas
- Extreme heat can soften, warp, deform, or permanently damage 3D-printed materials
Important: 3D-printed items are not food safe unless the product listing says so. Do not use them for direct food contact.
All Customized Products
- Avoid abrasive cleaners, prolonged soaking, harsh chemicals, and excessive heat
- Specialty finishes may need extra care. These include embroidery, appliqué, rhinestones, sublimation, DTG printing, UV printing, laser engraving, engraving fills, vinyl, and 3D-printed components
- Do not leave customized products in vehicles or other enclosed spaces where temperatures can get extremely hot
- If a product's own instructions differ from these general guidelines, follow the product's instructions
Questions about caring for a specific piece? Contact us and we're happy to help.
Images are digital mockups unless labeled “Actual Product Photo.”
Lucky Teacher Life St. Patrick's Day T-Shirt | Shamrock Teacher Tee